Group challenges
Newspaper Tower Challenge
Teams build the tallest free-standing tower they can from ten sheets of newspaper and one metre of masking tape in 20 minutes. A classic engineering challenge with a printable design log, structured roles and a clear debrief.
By the Success Tutoring Teachers team · Updated · Educator review in progress · How we make our resources
Setup
- Collect newspaper in advance (ask colleagues or the school office). Count out 10 sheets per group.
- Pre-cut 1 metre of masking tape per group and stick it to the edge of each table.
- Clear table space or use the floor in an open area.
- Write the rules on the board: 10 sheets. 1 m of tape. 20 minutes. The tower must stand on its own for 10 seconds. No sticking it to the table, wall or ceiling.
Safety
- Newspaper ink can mark hands and clothes: have students wash hands afterwards.
- No standing on chairs or tables to build or measure a tall tower. Measure with the tape held from the table or floor up.
How to run the activity
- 1Say: 'Engineers build tall things from limited materials. Your team will design and build the tallest tower that stands on its own.'
- 2Assign roles (students can choose): Project manager (keeps time), Builder, Builder, Materials manager (tracks tape and paper).
- 3Plan (5 min): teams complete Questions 1–3 of the design log and sketch an idea. No building yet.
- 4Build (15 min): start the timer. Call out time at 10, 5 and 1 minute remaining. Circulate and ask questions rather than giving solutions: 'What is making it wobble?'
- 5Measure: at 'hands off', each tower must stand for 10 seconds. Measure from the table or floor to the highest point and record on the board.
- 6Debrief (5 min): teams complete Questions 4–6 of the design log. Ask the class: 'What shapes made the strongest base? What would you test next?'
Learning outcomes
- Apply ideas about strong shapes (triangles, rolled tubes) and wide bases to a design.
- Follow a design process: plan, build, test, evaluate.
- Work productively in a team with defined roles.
Printable student sheet
Newspaper Tower: Design Log
Answer Questions 1–3 before you build, and Questions 4–6 after you measure your tower.
- 11. Sketch your tower idea. Label where you will use rolled tubes, folds or tape.
- 22. What will you do to make your tower stable so it doesn't fall over?
- 33. How will you use your 1 metre of tape wisely?
- 44. How tall was your tower? Did it stand for 10 seconds?
- 55. What was one thing that worked well in your design?
- 66. If you built it again, what would you change and why?
Show answers and teacher guidanceHide answers
- Look for a labelled sketch showing a wide base and some structural features (tubes, triangles).
- Model answer: We will make a wide base with three legs and join them with triangles so the tower doesn't wobble.
- Model answer: We will cut small pieces (about 5 cm) and use tape only at joins, not to cover the paper.
- Accept the measured height in centimetres. Check students used the agreed measuring point (highest point, measured from the base).
- Model answer: Rolling the paper into tight tubes made the legs much stronger than flat paper.
- Model answer: We would make the base wider, because our tower leaned once it got tall.
Variations
- Load test: the tower must hold a tennis ball or a beanbag on top for 10 seconds.
- Budget version: each sheet and each 10 cm of tape has a cost, and teams must stay within budget.
- Silent build: teams plan aloud but build in silence, then discuss how communication changed.
Extension
- Teams calculate the 'height per sheet' of their tower and compare efficiency.
- Research (using class books) a famous tall structure and identify one design feature they could copy.
Additional support
- Show a photo or quick demonstration of how to roll a sheet into a tight tube before starting.
- Give an extra 5 minutes of build time.
Extension challenge
- Add the rule that the tower must survive a gentle 'earthquake' (tapping the table three times).
Teacher notes
- Rolled tubes and triangular bracing are the most common winning features. Let teams discover this rather than telling them.
- Celebrate the best improvement and the best teamwork as well as the tallest tower.
- Students with mobility needs can build on a table rather than the floor, and every role (planning, measuring, timekeeping) is a genuine contribution.
More group challenges
One-Sheet Paper Chain Challenge
Small groups have one sheet of paper, a pair of safety scissors and 30 cm of tape to make the longest paper chain they can in 15 minutes. A low-cost group challenge about planning, measuring and teamwork.
Paper Bridge Strength Challenge
Teams build a bridge from just two sheets of paper to span a 20 cm gap, then load it with coins to find the strongest design. Includes fair-testing rules, a recording sheet and discussion of why folds and shapes add strength.
Silent Line-up Challenge
Each student gets a card and the class must line up in order without talking, using only gestures. Uses number, word and fraction cards rather than personal details, so no one is singled out. An eight-minute brain break with built-in learning.