Skip to content
Home: Success TutoringTeachers

Year 3 Maths lesson plan · More Maths resources

Capacity in Litres and Millilitres: Measuring Jugs, Cups and Reading Scales

Students compare how much containers hold, measure capacity with measuring jugs and cups, learn that 1000 millilitres make 1 litre, and read jug scales by working out what each mark is worth. Water stations with clear safety and clean-up steps make the learning hands-on, and every answer is checked.

  • 45 minutes
  • Year 3
  • Maths
  • Capacity
  • 🇦🇺 Australia

By the Success Tutoring Teachers team · Updated · Educator review in progress · How we make our resources

Download PDF

Overview

Learning objectives

Students will…

  • Compare the capacity of containers by filling and pouring.
  • Know that 1000 millilitres = 1 litre and convert between simple amounts.
  • Read the scale on a measuring jug by working out what each unlabelled mark is worth.
  • Choose litres or millilitres to measure the capacity of a container.

Success criteria

Students can say…

  • I can find out which container holds more by pouring.
  • I can say how many millilitres are in 1 L, 2 L and 12 L.
  • I can read a measuring jug at eye level and work out what each mark is worth.
  • I can choose litres or millilitres for different containers.

Curriculum focus: Measurement · Australian Curriculum v9.0

Specific curriculum codes are added once our team has checked them against the official documents. How we align resources

NSW and Victoria

  • NSW: Stage 2 (Years 3–4), NSW Mathematics K–10 Syllabus.
  • Victoria: Levels 3–4, Victorian Curriculum 2.0 Mathematics.

Placement can differ by a year between schools, so check your school's scope and sequence.

Key vocabulary

capacity
How much a container can hold.
litre (L)
A unit of capacity. Many milk bottles and drink bottles hold 1 L.
millilitre (mL)
A small unit of capacity. 1000 mL = 1 L. A teaspoon holds about 5 mL.
measuring jug
A container with a scale marked on the side to measure liquids.
eye level
Bending down so your eyes are level with the top of the water to read the scale.

In the glossary: capacity, converting units, metric system

Materials & preparation

You will need

  • Clear 1 L measuring jugs marked every 100 mL (some also marked every 50 mL), one per group
  • Measuring cups (250 mL) and a 5 mL measuring spoon, one set per group
  • Plastic containers to compare: a cup, a small yoghurt pot, a 600 mL bottle, an ice-cream tub, a 2 L bottle (all clean and empty, no glass)
  • Large trays to work on, a bucket of water per two groups, towels and paper towels
  • Large drawings of three jug scales for the board: 0 to 1 L marked every 100 mL; 0 to 500 mL marked every 50 mL; 0 to 1 L marked every 250 mL
  • The practice sheet and exit ticket (printable)

Before the lesson

  1. Set out each water station on a large tray, with towels underneath and paper towels nearby.
  2. Fill buckets only halfway so they are light enough to carry safely and less likely to spill.
  3. Check every container is plastic, clean and has no sharp edges.
  4. Draw the three jug scales on the board or prepare them as slides.
  5. If possible, run the water stations outside or near a sink.

Safety

  • Work on trays with towels underneath, and wipe up any spill straight away with a paper towel so nobody slips.
  • Tell the teacher at once if water gets on the floor; keep students away from wet patches until dry.
  • Use plastic containers only, never glass, and check for sharp edges.
  • Fill buckets only halfway so they are light enough to carry; the teacher (not students) carries the buckets.
  • Students must not drink the water. Keep water away from power points and electrical equipment, and wash and dry hands afterwards.

Lesson sequence

  1. 1

    Warm-up: which holds more?

    5 min

    Teacher

    • Hold up a tall, thin bottle and a short, wide tub. Ask: 'Which one holds more? Vote with your hands.'
    • Say: 'How much a container can hold is called its capacity. Tall does not always mean it holds more. Today we will measure capacity properly.'
    • Say the safety rules: 'Pour only over the tray. If you spill, wipe it up straight away with a paper towel and tell me if the floor is wet. Never drink the water.'

    Students

    • Predict which container holds more, then repeat the safety rules to a partner.
  2. 2

    Explicit teaching: litres and millilitres

    8 min

    Teacher

    • Hold up a 1 L measuring jug filled to the 1 L line. Say: 'This is 1 litre. We write 1 L.'
    • Hold up the 5 mL spoon. Say: 'This spoon holds 5 millilitres. Millilitres are small. 1000 millilitres make 1 litre.'
    • Write on the board: 1 L = 1000 mL, 2 L = 2000 mL, 12 L = 500 mL. Ask: 'What is 3 L in millilitres?' (3000 mL.) 'What is 1250 mL in litres and millilitres?' (1 L 250 mL.)
    • Pour a 250 mL cup into the jug 4 times, counting: '250, 500, 750, 1000 mL. Four cups make 1 litre.'
    • Ask: 'Would you use litres or millilitres for a bath? A medicine spoon?' (Litres; millilitres.)

    Students

    • Count along as cups are poured, and answer conversions on whiteboards.
  3. 3

    Explicit teaching: reading a jug scale

    8 min

    Teacher

    • Show the jug scale from 0 to 1 L marked every 100 mL. Say: 'Put the jug on a flat table and bend down so your eyes are level with the top of the water. Then read the scale.'
    • Say: 'There are 10 spaces from 0 to 1000 mL. 1000 ÷ 10 = 100, so each mark is 100 mL.' Draw water up to the 6th mark. Ask: 'How much water?' (600 mL.)
    • Show the 0 to 500 mL scale with labels at 100, 200, 300, 400 and 500 and a small mark between each. Say: 'Between 100 and 200 there are 2 spaces. Each space is 50 mL.' Draw water at the small mark between 400 and 500. Ask: 'How much?' (450 mL.)
    • Show the 0 to 1 L scale marked every 250 mL. Draw water to the third mark. Ask: 'How much? What fraction of a litre is that?' (750 mL, which is 34 L.)
    • Say: 'Step 1: find two labelled numbers. Step 2: count the spaces between them. Step 3: work out what each space is worth. Step 4: count on to the water line.'

    Students

    • Read each water level shown by the teacher, explaining what each mark is worth.
  4. 4

    Water stations

    16 min

    Teacher

    • Put students in groups of 4 with roles: pourer, reader, recorder and clean-up captain. Swap roles after each task.
    • Task 1: 'Order the five containers from smallest to largest capacity. Predict first, then check by filling one and pouring into another.'
    • Task 2: 'Fill each container, then pour it into the measuring jug. Read the jug at eye level and record the capacity in mL. If a container holds more than 1 L, fill the jug to 1 L, empty it into the bucket, and keep count of the full litres.'
    • Task 3: 'How many 250 mL cups fill the 2 L bottle?' (8, because 2000 ÷ 250 = 8.)
    • Circulate and ask: 'What is each mark worth? Are your eyes level with the water?' Remind clean-up captains to wipe spills straight away.
    • Two minutes before the end, say: 'Stop pouring. Tip water back into the bucket, wipe the trays and dry your hands.'

    Students

    • Predict, then pour and measure to order containers by capacity, recording each capacity in mL.
    • Wipe any spills immediately and pack away the station.
  5. 5

    Reflect and exit ticket

    8 min

    Teacher

    • Ask: 'Which container surprised you? Did a tall container hold less than you thought?'
    • Ask: 'Why do we bend down to read the jug?' (So we read the water level accurately.)
    • Give out the exit ticket and collect it before students leave.

    Students

    • Share a surprising result and complete the exit ticket.

Worked examples

Reading a jug with unlabelled marks

A jug is labelled 0, 200, 400, 600, 800 and 1000 mL, with one small mark between each label. The water is at the small mark between 600 and 800. How much water is there?

  1. Find two labels: 600 mL and 800 mL. The gap is 200 mL.
  2. There are 2 spaces between them, so each space is 200 ÷ 2 = 100 mL.
  3. Count on one space from 600: 600 + 100 = 700.

700 mL.

How many cups make a litre?

How many 250 mL cups of water fill a 1 L jug?

  1. 1 L = 1000 mL.
  2. Count in 250s: 250, 500, 750, 1000. That is 4 cups.
  3. Check: 4 × 250 = 1000.

4 cups.

Converting litres and millilitres

A bucket holds 3500 mL. Write this in litres and millilitres.

  1. 1000 mL = 1 L, so 3000 mL = 3 L.
  2. 3500 − 3000 = 500 mL left over.
  3. So 3500 mL = 3 L 500 mL, which is also 3 12 L.

3 L 500 mL (3 12 L).

Practice & answers

Printable student sheet

Litres, Millilitres and Reading Jugs

Answer each question. Remember: 1 L = 1000 mL. For jug scales, work out what each mark is worth first.

  1. 13 L = ___ mL
  2. 21 L 250 mL = ___ mL
  3. 3500 mL = what fraction of a litre?
  4. 4A jug goes from 0 to 1 L with a mark every 100 mL. The water is at the 3rd mark. How much water is there?
  5. 5A jug is labelled every 100 mL with a small mark halfway between each label. The water is at the small mark between 400 mL and 500 mL. How much water is there?
  6. 6How many 250 mL cups fill a 1 L jug?
  7. 7How many 200 mL glasses can be filled from a 1 L bottle?
  8. 8Would you use litres or millilitres for the capacity of a bucket? A teaspoon?
  9. 9Order from smallest to largest: 1 L, 800 mL, 1500 mL.
  10. 10Priya pours 600 mL and then 300 mL into an empty jug. How much water is in the jug? How much more does she need to make 1 L?
Show answers
  1. 3000 mL.
  2. 1250 mL.
  3. 12 L.
  4. 300 mL.
  5. 450 mL.
  6. 4 (4 × 250 = 1000).
  7. 5 (5 × 200 = 1000).
  8. Bucket: litres. Teaspoon: millilitres.
  9. 800 mL, 1 L, 1500 mL (1 L = 1000 mL).
  10. 900 mL (600 + 300). She needs 100 mL more (1000 − 900 = 100).

Differentiation

Offer tasks by choice or quietly by invitation — avoid labelling groups by ability in front of the class.

Additional support

  • Compare containers by pouring only, using the words holds more, holds less and holds the same.
  • Use a jug where every 100 mL mark is labelled before moving to unlabelled marks.
  • Put a strip of tape on the jug at 500 mL and 1 L as reference points.

Core task

  • Convert between L and mL, read jugs marked every 100 mL or 50 mL, and measure container capacities.

Extension challenge

  • Find the total of 1 L 400 mL and 750 mL (2150 mL, or 2 L 150 mL).
  • A 2 L bottle is shared equally between 8 cups. How much is in each cup? (250 mL, because 2000 ÷ 8 = 250.)
  • Investigate: 1 L of water has a mass of about 1 kg. Check it with kitchen scales and an empty 1 L container (remember to subtract the container's mass).

Assessment & exit ticket

Formative assessment

  • During the water stations, check that the reader bends to eye level and works out what each mark is worth.
  • Check recording sheets for sensible capacities in mL.
  • Use the exit ticket to check conversions and reading a water level between marks.

Exit ticket

  1. 2 L = ___ mL
  2. A jug is labelled every 100 mL with a small mark halfway between each label. The water is at the small mark between 700 mL and 800 mL. How much water is there?
  3. Which holds more: a 1 L bottle or a 900 mL bottle?
Show exit ticket answers
  1. 2000 mL.
  2. 750 mL.
  3. The 1 L bottle, because 1 L = 1000 mL, which is more than 900 mL.

Common misconceptions

  • Taller containers always hold more. A tall, thin bottle can hold less than a short, wide tub. Test by pouring.
  • Every mark on a jug is worth 1 or 10. Work out the interval: count the spaces between two labels and divide.
  • Reading the jug from above. Looking down makes the level look different. Put the jug on the table and bend to eye level.
  • 1 L = 100 mL. 'Milli' means one thousandth: 1000 mL = 1 L.

Extension

  • Container hunt: at home or in class, find labels showing capacity in mL or L and list them from smallest to largest (no photos needed).
  • Design a measuring jug: draw a jug scale from 0 to 2 L with marks every 250 mL and write two reading questions for a partner.

Free resources from other Success Tutoring sites that match this topic.

More lesson plans

Need a timer for this lesson? Open the Classroom Timer or make random groups.