Year 7 Science lesson plan Β· More Science resources
Energy Transformations Science Lesson: Forms of Energy, Hands-On Stations and Energy-Chain Diagrams
Students learn the forms of energy (kinetic, gravitational and elastic potential, chemical, thermal, electrical, light and sound), rotate through six safe hands-on stations to observe energy being transformed, and draw energy-chain diagrams that show where the 'wasted' thermal and sound energy goes. Includes full safety steps.
- 60 minutes
- Year 7
- Science
- Energy
- π³πΏ New Zealand
By the Success Tutoring Teachers team Β· Updated Β· Educator review in progress Β· How we make our resources
Overview
Learning objectives
Students willβ¦
- Name and describe the main forms of energy: kinetic, gravitational potential, elastic potential, chemical, thermal, electrical, light and sound.
- Observe and describe energy transformations in everyday objects and events.
- Draw an energy-chain diagram that shows the useful output and the energy transferred to the surroundings, and explain that energy is never used up, only transformed.
Success criteria
Students can sayβ¦
- I can name at least six forms of energy and give an example of each.
- I can describe what happened to the energy at each station.
- I can draw an energy chain with arrows, e.g. chemical β electrical β light + thermal.
- I can explain why a bouncing ball never bounces back to the height it was dropped from.
Curriculum focus: Science β Physical World Β· The New Zealand Curriculum
Specific curriculum codes are added once our team has checked them against the official documents. How we align resources
If a station's equipment is not available, swap in another everyday example and keep the same recording sheet. All stations use low-voltage, battery-powered or unpowered equipment only.
Key vocabulary
- energy
- The ability to make things happen or cause change, such as moving, heating or lighting something. Measured in joules (J).
- kinetic energy
- Energy an object has because it is moving.
- gravitational potential energy
- Stored energy an object has because of its height above the ground.
- elastic potential energy
- Stored energy in something that is stretched, squashed or twisted, such as a wound-up spring.
- chemical energy
- Energy stored in substances such as food, fuel and batteries, released by chemical reactions.
- thermal energy
- Energy related to how hot something is; often called heat.
- electrical energy
- Energy carried by an electric current.
- light energy
- Energy given out by things such as the Sun, torches and screens.
- sound energy
- Energy carried by vibrations travelling through a substance such as air.
- energy transformation
- A change of energy from one form to another, e.g. electrical to light.
- conservation of energy
- The idea that energy cannot be created or destroyed, only transformed or transferred.
In the glossary: energy, heat, kinetic energy, potential energy, sound, vibration
Materials & preparation
You will need
- Station 1 (Bouncing ball): a tennis ball or rubber ball, a metre ruler taped upright to a wall
- Station 2 (Ramp racer): a toy car, a ramp made from a 1 m board or stiff cardboard and two or three books
- Station 3 (Battery torch): a battery-powered torch with the batteries already sealed inside. An LED torch is safest; an older filament-bulb torch shows the wasted heat more clearly but can get hot, so if you use one, check the casing is only warm before students touch it.
- Station 4 (Rub your hands): no equipment; a laminated instruction card
- Station 5 (Wind-up or pull-back toy): a wind-up toy or pull-back toy car
- Station 6 (Solar calculator or solar toy): a solar-powered calculator or small solar-powered toy, and a piece of card to cover the solar cell
- Laminated station instruction cards (text in Preparation)
- Station recording sheet (one per student): station name, what I saw, energy chain
- The practice sheet and exit ticket (printable)
Before the lesson
- Set up the six stations around the room, with clear floor space at Stations 1, 2 and 5. Keep Stations 1 and 2 away from doorways and walkways.
- Station cards. 1: 'Hold the ball at the 1 m mark and let it go (don't throw). Measure how high it bounces. Repeat twice. Why doesn't it come back to 1 m?' 2: 'Let the car roll from the top of the ramp. Make the ramp higher with one more book and try again. What changes?' 3: 'Switch the torch on and point it at the wall (never at anyone's eyes). After one minute, gently touch the glass or casing near the bulb. What do you notice?' 4: 'Press your palms together and rub fast for 10 seconds. What do you feel? What do you hear?' 5: 'Wind the toy (or pull the car back) and let it go on the floor. Where was the energy stored before it moved?' 6: 'Look at the calculator display. Cover the solar cell with card. What happens? Uncover it.'
- Test every station before the lesson: check the torch works, the solar calculator responds to classroom light (some need bright light; place it near a window) and the toys run.
- Draw the energy-chain template on the board: [form] β [form] β [useful output] + [wasted output].
Safety
- Drop the ball at Station 1 from no higher than 1 m; never throw it. Keep clear of other groups.
- Keep ramps and toys on the floor or low tables, away from walkways, and pick up anything that falls so nobody slips or trips.
- Never shine the torch into anyone's eyes. Touch the torch casing only gently and only after the teacher has checked it is just warm, not hot.
- Do not open battery compartments or remove batteries. Do not plug in or touch any mains-powered device during the lesson.
- Rub hands gently; stop if it becomes uncomfortable.
- Report broken equipment to the teacher straight away and do not use it.
Lesson sequence
- 1
Hook: where does the energy go?
6 minTeacher
- Hold a ball at head height. Ask: 'When I let this go, it will bounce. Will it come back up to my hand?' Take predictions. Drop it (do not throw it). It bounces lower each time and stops.
- Ask: 'The ball had energy when I held it up high. Now it is sitting still on the floor. Where did the energy go? Did it disappear?' Take ideas and write them on the board without correcting yet.
- Say: 'By the end of today you'll be able to answer that question like a scientist.'
Students
- Predict whether the ball will bounce back to the same height.
- Suggest where the ball's energy went.
- 2
Explicit teaching: forms of energy
12 minTeacher
- Say: 'Energy is what makes things happen: things move, heat up, light up or make sound. Scientists measure energy in joules.'
- Build a table on the board with the class, giving one example for each form: kinetic (a moving bike); gravitational potential (a book on a high shelf); elastic potential (a stretched rubber band, a wound-up spring); chemical (food, batteries, fuel); thermal (a hot drink); electrical (current flowing through a wire); light (the Sun, a torch); sound (a guitar string vibrating).
- Say: 'Potential energy is stored energy, waiting to be used. Gravitational, elastic and chemical energy are all stored. Kinetic, thermal, light, sound and electrical are energy that is being shown or carried.'
- Say: 'Here is the big idea of the lesson: energy is never used up. It cannot be created or destroyed. It only changes form. That change is called an energy transformation.'
- Return to the ball: 'Held up high, it had gravitational potential energy. As it fell, that became kinetic energy. When it hit the floor it squashed slightly, storing elastic energy, and pushed back up. But every bounce made a sound and warmed the ball and the floor a tiny bit. That sound and thermal energy spread into the room. The ball has less energy for the next bounce, so it can't reach the same height.'
- Quick check: students write the form of energy on whiteboards as you call out examples: a sizzling sausage (thermal and sound), a battery (chemical), a skateboarder at the top of a ramp (gravitational potential), a ringing phone (sound, light, electrical).
Students
- Help build the forms-of-energy table.
- Name the forms in the quick-check examples on whiteboards.
- 3
Modelling an energy-chain diagram
5 minTeacher
- Say: 'Scientists show transformations with an energy chain. Let's do a torch together.'
- Write: chemical energy (battery) β electrical energy (wires) β light energy (useful) + thermal energy (wasted).
- Say: 'Light is the useful output, the reason we bought the torch. Thermal energy is wasted: it doesn't help us see. Wasted doesn't mean destroyed; it means it spreads into the surroundings where we can't use it.'
- Read the safety steps aloud (see Safety) and show the station rotation order.
Students
- Copy the torch chain onto their recording sheet.
- Listen to and repeat back the safety steps.
- 4
Hands-on stations
22 minTeacher
- Organise groups of four or five. Each group spends about 3.5 minutes at each of the six stations, moving on your signal.
- Say: 'At every station: do the activity, write what you saw, then write the energy chain.'
- Circulate with prompts: 'Where was the energy stored before it moved?' 'What was the useful output?' 'What else did you hear or feel?' 'Which station had no moving parts at all?'
- At Station 1 check that students drop rather than throw the ball. At Station 3 check that the torch points at the wall.
- Expected chains to listen for β 1: gravitational potential β kinetic β elastic β kinetic, with sound and thermal lost at each bounce. 2: gravitational potential β kinetic + sound + thermal; a higher ramp gives more gravitational potential energy, so the car goes faster and further. 3: chemical β electrical β light + thermal. 4: chemical (in muscles, from food) β kinetic β thermal + sound. 5: elastic potential β kinetic + sound + thermal. 6: light β electrical (powering the display, or for a solar toy β kinetic + sound) + a little thermal; covering the cell stops or dims the display.
Students
- Complete each station activity safely.
- Record observations and an energy chain for each station.
- 5
Energy-chain diagram task and share
10 minTeacher
- Say: 'Choose two stations. Turn their energy chains into labelled diagrams with a picture for each form and arrows between them. Mark the useful output with a tick and the wasted output with a wavy arrow going off the side.'
- Invite three students to share. Ask the class: 'Did any station make energy out of nothing?' (No.) 'Did any station's energy get used up?' (No, it was transformed, and some spread out as thermal and sound energy.)
- Return to the hook question and have students write a one-sentence answer.
Students
- Draw two labelled energy-chain diagrams.
- Answer the hook question in one sentence.
- 6
Exit ticket
5 minTeacher
- Students complete the exit ticket independently. Collect to check understanding of energy chains and conservation of energy.
Students
- Complete the exit ticket.
Worked examples
Energy chain for an electric kettle
Draw the energy chain for an electric kettle boiling water.
- Start with the input: the kettle is plugged in, so electrical energy goes in.
- Identify the useful output: the water gets hot, so thermal energy.
- Identify any wasted outputs: the kettle makes a rumbling sound (sound energy) and the outside of the kettle and the air around it warm up (thermal energy to the surroundings).
electrical β thermal (useful, in the water) + sound + thermal (wasted, to the surroundings)
Why the bouncing ball stops
Tama drops a ball from 1 m. It bounces to 70 cm, then to about 50 cm. Explain why.
- At 1 m the ball has gravitational potential energy.
- As it falls, this becomes kinetic energy.
- On impact, some energy is stored as elastic energy and pushes the ball back up, but some is transformed into sound and thermal energy that spread into the room.
- Less energy is left to become gravitational potential energy again, so the ball cannot rise as high.
Each bounce transforms some energy into sound and thermal energy that spread into the surroundings, so less energy is left to lift the ball. The energy is not destroyed; it is spread out where it can no longer lift the ball.
Practice & answers
Printable student sheet
Energy Transformations Practice
Write an energy chain for each situation. Show the useful output and any wasted energy.
- 1A battery-powered torch is switched on.
- 2Mei kicks a soccer ball.
- 3A solar panel on a roof in sunshine.
- 4A loudspeaker playing music.
- 5Rubbing your hands together on a cold morning.
- 6Jayden rides his bike down a hill without pedalling, then brakes at the bottom.
- 7A wind-up toy walks across the table.
- 8True or false: when a toy car stops rolling, its energy has been used up. Explain.
- 9Why does a ball dropped from 1 m never bounce back to 1 m?
- 10At Station 2, why did the car travel faster from a higher ramp?
Show answersHide answers
- chemical β electrical β light (useful) + thermal (wasted).
- chemical (in her muscles, from food) β kinetic (her leg) β kinetic (the ball), with some sound and thermal energy.
- light β electrical (with some thermal energy as the panel warms).
- electrical β sound (useful) + thermal (wasted), with kinetic energy of the vibrating speaker cone in between.
- chemical (muscles) β kinetic (moving hands) β thermal (useful, warm hands) + sound.
- gravitational potential β kinetic (going down the hill); braking: kinetic β thermal (brakes and wheels warm up) + sound.
- elastic potential (wound spring) β kinetic + sound + thermal.
- False. Energy cannot be destroyed. The car's kinetic energy was transformed into thermal and sound energy that spread into the surroundings.
- At each bounce some energy is transformed into sound and thermal energy that spread into the surroundings, so less energy is left to lift the ball back up.
- A higher start gives the car more gravitational potential energy, so more energy can be transformed into kinetic energy and it moves faster.
Differentiation
Offer tasks by choice or quietly by invitation β avoid labelling groups by ability in front of the class.
Additional support
- Provide energy-form picture cards (a moving bike for kinetic, a battery for chemical and so on) that students can lay out as a chain before writing.
- Give a partly completed recording sheet with the first form in each chain filled in.
- Pair students so one reads the station card aloud while the other operates the equipment.
Core task
- Complete all six station records and two labelled energy-chain diagrams.
Extension challenge
- Draw an energy chain with at least five links for a hydro power station: gravitational potential (water held behind a dam) β kinetic (falling water) β kinetic (spinning turbine) β electrical β light, sound or thermal in homes.
- Rank the stations from most to least 'wasted' energy and justify your ranking.
- Explain why lights that stay cool to touch are described as more efficient than lights that become hot.
Assessment & exit ticket
Formative assessment
- Listen at stations for correct use of the names of energy forms.
- Check recording sheets for accurate energy chains, including wasted outputs.
- Use practice questions 8 and 9 to check understanding of conservation of energy.
- Sort exit tickets into secure / nearly / not yet.
Exit ticket
- Write the energy chain for a battery-powered fan.
- Zara says, 'The energy in the battery gets used up.' What would a scientist say?
- Name the form of energy stored in a book sitting on a high shelf.
Show exit ticket answersHide answers
- chemical β electrical β kinetic (useful, moving blades) + sound + thermal (wasted).
- Energy is never used up or destroyed. The chemical energy is transformed into other forms (such as electrical, then light or kinetic, sound and thermal) and much of it ends up spread through the surroundings as thermal energy.
- Gravitational potential energy.
Common misconceptions
- Energy gets used up. Energy is transformed, not destroyed. 'Wasted' energy has spread into the surroundings, usually as thermal energy.
- Only moving or glowing things have energy. Stored (potential) energy, such as chemical energy in food or gravitational energy in a raised object, is energy too.
- Heat and temperature are the same thing. A bath of warm water has more thermal energy than a cup of hot water, even though the cup is at a higher temperature.
- Energy and force are the same. A force is a push or pull; energy is what is transferred when a force makes something move.
- A solar calculator makes energy. It transforms light energy into electrical energy; with no light, it gets no energy.
Extension
- Students survey the classroom (without touching any plugs or switches) and list five devices with their input energy and useful output energy.
- Design a marble run that uses gravitational potential energy to make the marble ring a bell at the end, and draw its energy chain.
Keep the learning going
Free resources from other Success Tutoring sites that match this topic.
More lesson plans
Living and Non-living Things: a School Grounds Hunt and Picture Card Sort
Students explore the school grounds to find living and non-living things, then sort picture cards and explain their thinking: living things grow, need food and water, and can make new living things like themselves. They finish by naming what plants and animals need to stay alive. Includes outdoor safety steps.
My Five Senses: Seeing, Hearing, Smelling, Tasting and Touching
Students name the five senses and the body parts we use for each, then explore safely at four stations: looking, listening, smelling and touching. They sort pictures by the sense they would use and learn that we often use more than one sense at a time. Tasting is talked about, not done, and clear rules keep everyone safe.
Animal Life Cycles: Butterfly, Frog and Chicken, with Metamorphosis and Direct Development
Students learn that every animal has a life cycle, then follow three: a butterfly (egg, caterpillar, chrysalis, adult), a frog (eggs, tadpole, froglet, adult) and a chicken (egg, chick, adult). They compare animals that change body shape completely through metamorphosis with animals whose young look like small adults, and sequence and compare the cycles.
Need a timer for this lesson? Open the Classroom Timer or make random groups.