Skip to content
Home: Success TutoringTeachers

Year 8 Science lesson plan · More Science resources

Simple Machines and Mechanical Advantage: Levers, Pulleys, Ramps and a Ruler Lever Investigation

Students meet the six simple machines (lever, pulley, wheel and axle, inclined plane, wedge and screw), learn that each trades a smaller force for a longer distance, and calculate mechanical advantage. A ruler-and-washer lever investigation shows that load × load distance = effort × effort distance.

  • 60 minutes
  • Year 8
  • Science
  • Forces and simple machines
  • 🇳🇿 New Zealand

By the Success Tutoring Teachers team · Updated · Educator review in progress · How we make our resources

Download PDF

Overview

Learning objectives

Students will…

  • Name and give an everyday example of each of the six simple machines, and describe a wedge and a screw as forms of the inclined plane.
  • Explain that a simple machine can reduce the force needed, but the effort must then move a greater distance, so no work is saved.
  • Calculate mechanical advantage from forces (load ÷ effort) or distances, and use it to find the effort needed.
  • Investigate a ruler lever and show that load × load distance = effort × effort distance.

Success criteria

Students can say…

  • I can sort everyday objects into the six simple machines.
  • I can label the effort, load and fulcrum on a lever, and name its class.
  • I can calculate mechanical advantage and say whether a machine makes the job easier.
  • I can balance a ruler lever and explain my results with a calculation.

Curriculum focus: Science — Physical World · The New Zealand Curriculum

Specific curriculum codes are added once our team has checked them against the official documents. How we align resources

Key vocabulary

simple machine
A device with few or no moving parts that changes the size or direction of a force: lever, pulley, wheel and axle, inclined plane, wedge or screw.
effort
The force you apply to a machine.
load
The force the machine moves or overcomes, often the weight of an object.
fulcrum
The pivot point a lever turns on.
mechanical advantage (MA)
How many times a machine multiplies your force: MA = load ÷ effort. An MA of 3 means the load is 3 times the effort.
newton (N)
The unit of force. A 100 g mass, such as a small apple, has a weight of about 1 N.
inclined plane
A ramp: a sloping surface that lets you raise a load with a smaller force over a longer distance.
wedge
Two inclined planes back to back, used to split, cut or hold things (an axe head, a doorstop).
screw
An inclined plane wrapped around a cylinder (a jar lid, a bolt).

In the glossary: force, lever, pulley, simple machine, weight

Materials & preparation

You will need

  • Per pair: a rigid 30 cm plastic ruler, a pencil with flat (hexagonal) sides or a triangular block to act as the fulcrum, 15 identical steel washers (or identical coins), reusable adhesive putty or tape, a calculator
  • Display objects, one per simple machine: scissors (lever), a toy or curtain pulley, a screwdriver (wheel and axle), a plank or book ramp (inclined plane), a plastic doorstop (wedge), a jar with a screw-top lid (screw)
  • Optional: a spring balance (force meter) reading 0 to 10 N, a 500 g mass or bag of sand, and a ramp made from a 1 m board on a stack of books
  • Practice sheet and exit ticket (printable)

Before the lesson

  1. Check each ruler balances on the fulcrum at its 15 cm mark. If one doesn't quite balance, put a small blob of adhesive putty on the lighter end until it does.
  2. Count washers into a cup for each pair.
  3. Set out the six display objects at the front, each with a number card.
  4. Draw the results table on the board: Effort washers | Effort distance (cm) | Load × load distance | Effort × effort distance | MA.

Safety

  • No flames or electricity are used in this lesson.
  • Keep faces back from rulers: a ruler that tips suddenly can flick a washer.
  • Washers stay on the desk: never flick, throw or put them in your mouth. Count them in and out.
  • Use plastic rulers only, and do not bend them to test their strength.
  • In the optional ramp extension, keep feet clear of the bottom of the ramp and use only a small bag of sand, not heavy masses.

Lesson sequence

  1. 1

    Hook: lifting the teacher

    5 min

    Teacher

    • Say: 'Could one of you lift me off the ground using only your little finger? Not by pulling on me: you're allowed one tool.'
    • Take ideas, then say: 'With a long enough plank and a pivot, yes. Archimedes is said to have claimed he could move the whole Earth with a long enough lever and a place to stand. Today we find out why, and we'll work out how long the lever would need to be.'

    Students

    • Suggest tools that might work.
  2. 2

    Explicit teaching: six machines and the big trade-off

    13 min

    Teacher

    • Hold up each display object. Say: 'Scissors are two levers joined at a pivot. A pulley is a wheel with a rope over it. A screwdriver is a wheel and axle: the wide handle is the wheel, the thin shaft is the axle. A ramp is an inclined plane. A doorstop is a wedge: two ramps back to back. The jar lid is a screw: a ramp wrapped round a cylinder. Run your finger along the thread and you'll feel the ramp going round.'
    • Say: 'Every simple machine does the same trick: it lets you use a smaller force, but you have to move it further. Push a loaded cart up a long ramp instead of lifting it straight up: easier, but further. You never get something for nothing.'
    • Write MA = load ÷ effort. Say: 'If a machine lets 30 N of effort lift a 120 N load, MA = 120 ÷ 30 = 4. The machine multiplies your force by 4.'
    • Draw a lever. Label fulcrum, effort and load. Say: 'For a lever, the distances from the fulcrum tell you the MA: MA = effort distance ÷ load distance. A crowbar with your hands 90 cm from the fulcrum and the load 15 cm from it has MA = 90 ÷ 15 = 6.'
    • Draw the three classes. Say: 'First class: fulcrum in the middle, like a seesaw or scissors. Second class: load in the middle, like a wheelbarrow. Third class: effort in the middle, like tweezers or your forearm. Third-class levers have an MA less than 1: they cost you force, but the load moves further and faster.'
    • Say: 'For pulleys, count the rope sections holding up the load. One fixed pulley: MA 1, it just changes direction so you can pull down instead of up. A system with 4 rope sections holding the load: MA 4.'
    • Say: 'For a ramp, ignoring friction, MA = length of the slope ÷ height. A 6 m ramp up to a 1.5 m step: MA = 6 ÷ 1.5 = 4.'

    Students

    • Copy and label the three classes of lever.
    • Record the MA rule for levers, pulleys and ramps.
  3. 3

    Safety briefing and investigation set-up

    4 min

    Teacher

    • Read the safety rules aloud (see Safety). Say: 'Washers stay on the desk, never flicked or thrown. Faces back from the ruler: if it tips, it can flick a washer.'
    • Model the set-up: fulcrum at the ruler's 15 cm mark. Say: 'All distances are measured from the fulcrum, not from the end of the ruler. The load is a stack of 6 washers with its centre 4 cm from the fulcrum, at the 11 cm mark. Your job: find where to put different effort stacks on the other side to balance it.'

    Students

    • Set up the ruler on the fulcrum and check it balances empty.
  4. 4

    Ruler lever investigation

    18 min

    Teacher

    • Say: 'Predict first: where must 2 washers go to balance 6 washers at 4 cm? Write it down, then test.' Let pairs test 2, 3, 4, 6 and 8 washers as the effort, recording the distance that balances.
    • Circulate and ask: 'Which needs the bigger distance: 2 washers or 4?' 'What do you notice when you multiply washers by distance on each side?'
    • Expected results: 2 washers at 12 cm, 3 at 8 cm, 4 at 6 cm, 6 at 4 cm, 8 at 3 cm. Load side: 6 × 4 = 24 every time; effort side: 2 × 12, 3 × 8, 4 × 6, 6 × 4 and 8 × 3 all equal 24.
    • Say: 'Real results will be close but not perfect, because a stack has width and its centre is hard to place exactly. Within half a centimetre is a good result.'
    • Pairs who finish: 'Where would 1 washer have to go? Can your ruler do it?' (At 24 cm from the fulcrum, which is past the end of a 30 cm ruler balanced at its centre. A longer lever would be needed.)
    • Two minutes before the end, call 'Washers in cups', and check every washer is collected.

    Students

    • Predict, test and record five balance positions.
    • Calculate washers × distance on each side and the MA (load washers ÷ effort washers) for each row.
  5. 5

    Results and discussion

    12 min

    Teacher

    • Fill in the board table from class results. Ask: 'What's the pattern?' (Load × load distance = effort × effort distance.)
    • Say: 'When 2 washers balanced 6, the MA was 6 ÷ 2 = 3. And the effort distance divided by the load distance was 12 ÷ 4 = 3. The same number, worked out two ways.'
    • Ask: 'When 8 washers balanced 6, what was the MA?' (6 ÷ 8 = 0.75.) 'Is the lever helping?' (Not with force: you need more effort than the load. That's like a third-class lever.)
    • Back to the hook: 'If my weight is 600 N and you can push with 60 N, what MA do you need?' (600 ÷ 60 = 10.) 'If my end of the plank is 0.5 m from the pivot, how far must your end be?' (10 × 0.5 = 5 m.)

    Students

    • Share results and explain the pattern using the words effort, load and fulcrum.
  6. 6

    Exit ticket

    8 min

    Teacher

    • Students complete the exit ticket on their own. Sort it into secure / nearly / not yet.

    Students

    • Answer the exit ticket on their own.

Worked examples

Mechanical advantage of a lever

A wheelbarrow carries a 450 N load 40 cm from the wheel (the fulcrum). The handles are 120 cm from the wheel. What is the MA, and what effort is needed to lift the handles (ignoring the wheelbarrow's own weight)?

  1. The load is between the fulcrum and the effort, so it is a second-class lever.
  2. MA = effort distance ÷ load distance = 120 ÷ 40 = 3.
  3. Effort = load ÷ MA = 450 ÷ 3 = 150 N.
  4. Check: load × load distance = 450 × 40 = 18 000; effort × effort distance = 150 × 120 = 18 000.

MA = 3; effort = 150 N.

Mechanical advantage of a ramp

A 6 m ramp leads up to a loading dock 1.5 m high. Ignoring friction, what force is needed to push an 800 N box up it? In a real test the push needed was 250 N. What is the actual MA?

  1. Ideal MA = slope length ÷ height = 6 ÷ 1.5 = 4.
  2. Ideal effort = 800 ÷ 4 = 200 N.
  3. Actual MA = load ÷ actual effort = 800 ÷ 250 = 3.2.
  4. The actual MA is lower because extra force is needed to overcome friction between the box and the ramp.

Ideal effort 200 N; actual MA 3.2 (less than 4 because of friction).

Pulleys

Liam lifts a 400 N load with a pulley system in which 4 rope sections support the load. Ignoring friction and the weight of the pulleys, what effort does he need? How far must he pull the rope to raise the load 1 m?

  1. MA = number of supporting rope sections = 4.
  2. Effort = 400 ÷ 4 = 100 N.
  3. Each of the 4 rope sections must shorten by 1 m, so Liam pulls 4 × 1 = 4 m of rope.
  4. Check the trade-off: 400 N × 1 m = 100 N × 4 m = 400 J of work either way.

100 N of effort, pulling 4 m of rope.

Practice & answers

Printable student sheet

Simple Machines Practice

Show working for every calculation. Ignore friction unless the question mentions it.

  1. 1Name the simple machine in each: (a) a playground slide (b) an axe head (c) a bottle-top screw lid (d) a seesaw (e) a flagpole rope system (f) a doorknob.
  2. 2Explain why a wedge and a screw are both forms of the inclined plane.
  3. 3Name the class of each lever: (a) scissors (b) a wheelbarrow (c) tweezers.
  4. 4A machine lifts a 300 N load with an effort of 75 N. What is its MA?
  5. 5A crowbar has the effort 90 cm from the fulcrum and the load 15 cm from it. Find the MA and the effort needed to move a 1200 N rock.
  6. 6On a ruler lever, 6 washers sit 4 cm from the fulcrum. How far from the fulcrum must 3 washers go on the other side to balance them?
  7. 7A single fixed pulley at the top of a flagpole has an MA of 1. Why use it?
  8. 8A ramp is 5 m long and rises 1 m. What is its ideal MA, and what force is needed to push a 600 N cart up it?
  9. 9A screwdriver handle has a radius of 2 cm and its shaft has a radius of 0.5 cm. What is the ideal MA of this wheel and axle?
  10. 10Priya says, 'A ramp means you do less work.' Is she right? Explain.
  11. 11Your forearm is a third-class lever with an MA less than 1. What is the advantage of this design?
  12. 12The ideal MA of a ramp is 4, but in a test an 800 N box needed 250 N of effort. Calculate the actual MA and explain the difference.
Show answers
  1. (a) inclined plane (b) wedge (c) screw (d) lever (e) pulley (f) wheel and axle.
  2. A wedge is two inclined planes back to back. A screw is an inclined plane wrapped around a cylinder: its thread is a ramp spiralling around it.
  3. (a) First class: fulcrum between effort and load. (b) Second class: load between fulcrum and effort. (c) Third class: effort between fulcrum and load.
  4. MA = 300 ÷ 75 = 4.
  5. MA = 90 ÷ 15 = 6. Effort = 1200 ÷ 6 = 200 N.
  6. 6 × 4 = 24, so 3 × distance = 24 and distance = 8 cm.
  7. It changes the direction of the force: you pull down on the rope to raise the flag up, which is easier and lets you stay on the ground.
  8. MA = 5 ÷ 1 = 5. Effort = 600 ÷ 5 = 120 N.
  9. MA = wheel radius ÷ axle radius = 2 ÷ 0.5 = 4.
  10. No. The ramp reduces the force needed, but you push over a longer distance, so the work (force × distance) is the same or a little more because of friction.
  11. The hand (the load end) moves a much greater distance and faster than the muscle contracts, so you can move your hand quickly and through a wide range.
  12. Actual MA = 800 ÷ 250 = 3.2. It is less than 4 because extra force was needed to overcome friction.

Differentiation

Offer tasks by choice or quietly by invitation — avoid labelling groups by ability in front of the class.

Additional support

  • Provide a picture card of the six machines with an example of each, and a lever diagram with effort, load and fulcrum labelled.
  • Give the formula triangle: MA = load ÷ effort, effort = load ÷ MA.
  • In the investigation, give the predicted positions and have students test and check them off.

Core task

  • Complete the investigation and practice questions 1 to 10.

Extension challenge

  • Answer questions 11 and 12.
  • With 6 washers at 4 cm as the load, find two different ways to balance it using two effort stacks at once (e.g. 2 washers at 9 cm and 2 washers at 3 cm, because 18 + 6 = 24; or 1 washer at 12 cm and 3 washers at 4 cm, because 12 + 12 = 24).
  • Calculate the work done lifting a 400 N load 1 m directly (400 J) and with the 4-rope pulley system (100 N × 4 m = 400 J), and explain what this shows.

Assessment & exit ticket

Formative assessment

  • Check sorting of the display objects into the six machines.
  • Observe the investigation: are distances measured from the fulcrum?
  • Mark practice questions 5, 6 and 8 for correct use of MA.
  • Sort exit tickets into secure / nearly / not yet.

Exit ticket

  1. A lever has the effort 80 cm from the fulcrum and the load 20 cm from the fulcrum. What is its MA, and what effort lifts a 240 N load?
  2. Name the simple machine in a jar lid and in a doorstop.
  3. What is the 'catch' with every simple machine that reduces the force needed?
Show exit ticket answers
  1. MA = 80 ÷ 20 = 4. Effort = 240 ÷ 4 = 60 N.
  2. Jar lid: screw. Doorstop: wedge.
  3. The effort must move a greater distance, so the work done is not reduced.

Common misconceptions

  • Machines reduce the work you do. They reduce the force, but you move it further. Work stays the same (or increases with friction).
  • Distances are measured from the end of the lever. They are measured from the fulcrum.
  • A machine with MA less than 1 is useless. It gains distance and speed instead of force, which is what tweezers, brooms and fishing rods need.
  • A single fixed pulley halves the effort. It has an MA of 1; it only changes the direction of the force.
  • Heavier always sinks on a lever. A smaller load further from the fulcrum can balance or lift a bigger load closer to it.

Extension

  • Use a spring balance to measure the force needed to drag a 500 g bag of sand up a board ramp at three different heights, and compare actual and ideal MA.
  • Identify the simple machines in a bicycle (pedal and crank as a wheel and axle, brake levers, gears) and sketch where each one is.

More lesson plans

Need a timer for this lesson? Open the Classroom Timer or make random groups.