Grade 6 Science lesson plan · More Science resources
Earth's Layers and Plate Tectonics: Crust, Mantle, Core and the Three Types of Plate Boundary
Students build a paper-strip scale model of Earth's crust, mantle, outer core and inner core, then learn how the lithosphere is broken into moving plates. Using simple hands-on models, they show what happens at convergent, divergent and transform boundaries and match each one to the landforms and hazards it makes, from mid-ocean ridges to fold mountains and trenches.
- 60 minutes
- Grade 6
- Science
- Earth's structure and plate tectonics
- 🇺🇸 United States
By the Success Tutoring Teachers team · Updated · Educator review in progress · How we make our resources
Overview
Learning objectives
Students will…
- Name and describe Earth's layers (crust, mantle, outer core, inner core), including whether each is solid or liquid, and build a scale model of them.
- Explain that the lithosphere is broken into tectonic plates that move slowly over the weaker, slowly flowing mantle rock beneath.
- Describe the movement at convergent, divergent and transform boundaries and match each to the landforms and hazards it produces.
Success criteria
Students can say…
- I can list Earth's layers in order and say which one is liquid.
- I can explain why the inner core is solid even though it is extremely hot.
- I can show with my hands or a model how plates move at each of the three boundary types.
- I can match a landform, such as an ocean trench or a mid-ocean ridge, to the boundary that makes it.
- I can give one piece of evidence that the continents have moved.
Curriculum focus: Earth and Space Science — Earth's structure and plate tectonics · State standards (Texas TEKS first)
Specific curriculum codes are added once our team has checked them against the official documents. How we align resources
Texas students may meet Earth's layers and plate boundaries in different middle school grades. The lesson works as a first introduction or as a review before plate boundaries are revisited.
Key vocabulary
- crust
- Earth's thin, rocky outer layer. Oceanic crust is about 5 to 10 km thick; continental crust is usually about 30 to 70 km thick.
- mantle
- The thick layer of hot rock between the crust and the core, reaching about 2,900 km down. It is almost all solid, but the rock can flow very slowly over millions of years.
- outer core
- A layer of liquid iron and nickel about 2,250 km thick. Its movement produces Earth's magnetic field.
- inner core
- The solid ball of iron and nickel at Earth's center, about 1,220 km in radius. It is extremely hot but is kept solid by enormous pressure.
- lithosphere
- The rigid outer shell of Earth: the crust plus the top part of the mantle. It is broken into tectonic plates.
- tectonic plate
- A large slab of the lithosphere that moves slowly, usually a few centimeters a year.
- convergent boundary
- Where two plates move towards each other. One may sink under the other (subduction), or the crust may crumple into fold mountains.
- divergent boundary
- Where two plates move apart and magma rises to form new crust, such as at a mid-ocean ridge or a rift valley.
- transform boundary
- Where two plates slide past each other sideways. Crust is not made or destroyed, but earthquakes are common.
- subduction
- When a denser oceanic plate sinks beneath another plate into the mantle.
In the glossary: core, crust, density, earthquake, fossil, magma, mantle, natural hazard, plate tectonics, valley, volcano
Materials & preparation
You will need
- Per student: a paper strip about 70 cm long (adding-machine tape, or three strips cut lengthwise from printer paper and taped end to end), a ruler and colored pencils
- Per pair: two sheets of printer paper and two thick hand towels (or two pieces of craft foam) for plate boundary models
- A world map showing tectonic plates (printed or in the class atlas)
- A peeled-egg or peach diagram on the board for the analogy (no real food needed)
- Practice sheet and exit ticket (printable)
Before the lesson
- Cut or tape the paper strips before the lesson (one per student).
- Write the scale model measurements on the board (see the second sequence phase).
- Fold the hand towels in half lengthwise so each pair has two flat 'plates'.
- Print one practice sheet and one exit ticket per student.
Safety
- Models stay on the desk. Push towels and paper gently; never flick, throw or swing them.
- Keep walkways clear of bags and model materials so no one trips.
- Use scissors, if needed for strips, with care and pass them handle first.
Lesson sequence
- 1
Hook: the widening ocean
5 minTeacher
- Show the world map. Say: 'Look at the east coast of South America and the west coast of Africa. What do you notice?' (They look like they would fit together like jigsaw pieces.)
- Say: 'Scientists have found fossils of the same small freshwater reptile, Mesosaurus, in both South America and southern Africa. It couldn't have swum across an ocean. What could explain that?' (The continents were once joined.)
- Say: 'The Atlantic Ocean is still getting wider today, by roughly 2 to 5 centimeters a year, about as fast as your fingernails grow. Today we'll find out what Earth is like inside and why its surface moves.'
Students
- Look at the map and suggest explanations in pairs.
- 2
Explicit teaching and scale model: Earth's layers
12 minTeacher
- Draw a circle with layers. Say: 'Earth has four main layers. The crust is the thin rocky skin we live on. If Earth were a peach, the crust would be thinner than the peach skin.'
- Say: 'Under the crust is the mantle, about 2,900 kilometers deep. Many people think the mantle is a sea of liquid lava. It isn't. It is almost all solid rock, but it is so hot that it can flow very, very slowly, like extremely stiff putty, over millions of years.'
- Say: 'Next is the outer core, made of liquid iron and nickel. As it moves, it creates Earth's magnetic field, which is why a compass works.'
- Say: 'At the center is the inner core, a solid ball of iron and nickel. It is roughly as hot as the surface of the Sun, over 5,000 °C. So why isn't it liquid?' Wait. 'The pressure from all the rock above is so enormous that the metal is squeezed solid.'
- Hand out the strips. Say: 'We'll make a scale model of Earth's radius, from the surface to the center. Our scale is 1 centimeter for every 100 kilometers. Earth's radius is about 6,371 km, so your strip needs to be 63.7 cm long.'
- Write and say: 'Measure from the end of the strip and mark: crust ends at 0.35 cm, about 3.5 mm, for thick continental crust; mantle ends at 29 cm; outer core ends at 51.5 cm; inner core ends at the center, 63.7 cm.'
- Say: 'Color each layer and label it solid, liquid or solid but slowly flowing. Now look at your crust. That tiny sliver is where every mountain, ocean and city is.'
Students
- Measure, color and label their scale strip.
- Write solid or liquid on each layer.
- 3
Explicit teaching: plates and plate boundaries
8 minTeacher
- Say: 'The crust and the very top of the mantle form a rigid shell called the lithosphere. It is cracked into seven or eight major plates and many smaller ones, like a cracked eggshell. The plates move slowly over the weaker, slowly flowing mantle rock underneath.'
- Say: 'What makes them move? Heat from deep inside Earth keeps the mantle rock slowly moving, and old, cold, heavy edges of plates sink into the mantle and pull the rest of the plate along behind them.'
- Point to the plate map. Say: 'Most earthquakes and volcanoes happen along plate edges, called boundaries. There are three types, named for how the plates move.'
- Say and show with your hands: 'Divergent: plates move apart. Convergent: plates move together. Transform: plates slide past each other sideways.'
- Say: 'Let's model each one, then find out what landforms they make.'
Students
- Copy the three boundary names with a hand-movement sketch for each.
- 4
Hands-on boundary models
13 minTeacher
- Read the safety rules aloud (see Safety): models stay on the desk, towels are pushed gently and never flicked or thrown, and everyone keeps clear walkways.
- Convergent (continent meets continent): 'Lay the two towels flat, edges touching. Push them slowly towards each other.' Ask: 'What happens?' (The edges crumple and fold upwards.) Say: 'That's how fold mountains such as the Himalayas formed, where two continental plates collided. They are still rising slowly.'
- Convergent (ocean meets continent): 'Now slide one towel under the other as you push. The lower towel is a dense oceanic plate.' Say: 'Oceanic crust is denser than continental crust, so it sinks underneath. That's subduction. It makes a deep ocean trench, and as the sinking plate heats up, magma rises to form a chain of volcanoes, like the Andes in South America. Where two oceanic plates meet, the same process makes a trench and a curved line of volcanic islands.'
- Divergent: 'Place two sheets of paper side by side and slowly pull them apart.' Say: 'The gap is where magma rises, cools and makes new crust. Under the ocean this makes a long underwater mountain range called a mid-ocean ridge. On land it makes a rift valley, like the East African Rift.'
- Transform: 'Put the two sheets edge to edge and slide them past each other, pressing down slightly.' Say: 'Feel how they catch, then jerk? Plates do the same. Stress builds up until the rocks suddenly slip, causing an earthquake. The San Andreas Fault in California is a famous example. Crust isn't made or destroyed here, so there are few volcanoes.'
- Ask pairs to fill in a table: boundary type, plate movement, landforms, hazards.
Students
- Model each boundary with the towels and paper.
- Complete the boundary table with their partner.
- 5
Independent practice
15 minTeacher
- Students work through the practice sheet. Direct students to the additional support, core or extension starting point (see Differentiation).
- Circulate and ask: 'Which plate sinks at a subduction zone, and why?' (The oceanic plate, because it is denser.)
Students
- Complete the practice questions.
- 6
Exit ticket
7 minTeacher
- Say: 'Answer on your own. Make sure you name the boundary type, not just the landform.' Sort tickets into secure / nearly / not yet to plan the next lesson.
Students
- Complete the exit ticket on their own.
Worked examples
Scale model of Earth's layers
Using a scale of 1 cm = 100 km, work out where to mark the bottom of each layer. Depths: crust to about 35 km (continental), mantle to about 2,900 km, outer core to about 5,150 km, center at about 6,371 km.
- Divide each depth by 100 to change kilometers to centimeters on the model.
- Crust: 35 ÷ 100 = 0.35 cm (3.5 mm).
- Mantle: 2,900 ÷ 100 = 29 cm.
- Outer core: 5,150 ÷ 100 = 51.5 cm. Center: 6,371 ÷ 100 = 63.71 cm, about 63.7 cm.
- Inner core thickness on the model: 63.7 − 51.5 = 12.2 cm, which is 1,220 km.
Marks at 0.35 cm, 29 cm, 51.5 cm and 63.7 cm.
Identifying a boundary from a description
Along a plate boundary there is a deep ocean trench, and about 200 km inland there is a chain of volcanic mountains. What type of boundary is it, and what is happening?
- A trench forms where one plate sinks beneath another, so this is subduction.
- Subduction happens at a convergent boundary, where plates move towards each other.
- The volcanoes are on land, so an oceanic plate is sinking beneath a continental plate.
- As the oceanic plate sinks and heats up, magma rises through the continental plate and erupts.
A convergent (oceanic–continental) boundary, where the denser oceanic plate is subducting under the continental plate.
How far do plates move?
A plate moves 5 cm a year. How far will it move in 1 million years? Give your answer in kilometers.
- 5 cm × 1,000,000 = 5,000,000 cm.
- 5,000,000 cm ÷ 100 = 50,000 m.
- 50,000 m ÷ 1,000 = 50 km.
50 km.
Practice & answers
Printable student sheet
Earth's Layers and Plate Tectonics Practice
Answer in full sentences where asked. Show your working for calculations.
- 1List Earth's four main layers from the surface to the center, and say whether each is solid or liquid.
- 2The inner core is hotter than the outer core. Why is the inner core solid?
- 3Compare oceanic crust and continental crust in thickness and density.
- 4On a scale model where 1 cm = 100 km, how long would the model of Earth's radius (6,371 km) be?
- 5What is the lithosphere, and how is it related to tectonic plates?
- 6Match each feature to the boundary type that forms it: (a) mid-ocean ridge (b) deep ocean trench (c) fold mountains such as the Himalayas (d) the San Andreas Fault (e) a rift valley on land (f) a curved chain of volcanic islands.
- 7At a convergent boundary between an oceanic plate and a continental plate, which plate sinks, and why?
- 8Why are there few volcanoes at transform boundaries?
- 9A plate moves 4 cm a year. How far will it move in 10 million years? Give your answer in kilometers.
- 10Give two pieces of evidence that the continents have moved.
- 11True or false: 'The mantle is a layer of liquid magma.' Explain.
Show answersHide answers
- Crust (solid), mantle (solid, but the rock flows very slowly), outer core (liquid), inner core (solid).
- The pressure at the center of Earth is so great that the iron and nickel are squeezed into a solid, even though they are extremely hot.
- Oceanic crust is thinner (about 5 to 10 km) and denser. Continental crust is thicker (usually about 30 to 70 km) and less dense.
- 6,371 ÷ 100 = 63.71 cm, about 63.7 cm.
- The lithosphere is the rigid outer shell of Earth, made of the crust and the top part of the mantle. It is broken into pieces called tectonic plates.
- (a) divergent (b) convergent, with subduction (c) convergent, continent meets continent (d) transform (e) divergent (f) convergent, ocean meets ocean, with subduction.
- The oceanic plate sinks (subducts) because oceanic crust is denser than continental crust.
- The plates slide past each other, so crust is neither created nor destroyed. No plate is sinking into the mantle and no gap opens for magma to rise.
- 4 cm × 10,000,000 = 40,000,000 cm = 400,000 m = 400 km.
- Any two: the coastlines of South America and Africa fit together; fossils of the same land or freshwater organisms (such as Mesosaurus) are found on continents now separated by oceans; matching rock types and mountain belts continue across separated continents; new seafloor forms at mid-ocean ridges and gets older further away from them.
- False. The mantle is almost entirely solid rock. It is hot enough to flow very slowly over millions of years, and only small pockets melt to form magma.
Differentiation
Offer tasks by choice or quietly by invitation — avoid labelling groups by ability in front of the class.
Additional support
- Provide a labeled diagram of Earth's layers with the depths filled in, and pre-marked scale strips with only coloring and labeling to do.
- Give a boundary card with three hand-movement pictures (apart, together, sliding) and the landforms for each.
- Start with questions 1, 2, 5 and 6.
Core task
- Complete questions 1 to 10.
Extension challenge
- Complete question 11.
- Use the plate map to explain why so many volcanoes and earthquakes are found around the edges of the Pacific Ocean. (Many convergent boundaries with subduction surround the Pacific plate and its neighbors.)
- Investigate hot spots: explain how a chain of volcanic islands can form in the middle of a plate, away from any boundary.
Assessment & exit ticket
Formative assessment
- Check the scale strips: are the layers in the right order, with the outer core labeled liquid?
- Watch the boundary models: can each pair show and name all three movements?
- Mark practice questions 6 and 7 to check boundary-landform links and the reason for subduction.
- Sort exit tickets into secure / nearly / not yet.
Exit ticket
- Name Earth's four layers in order from the surface, and circle the one that is liquid.
- Two plates are moving apart under the ocean. What type of boundary is this, and what landform does it make?
- Name the type of boundary where plates slide past each other, and the main hazard there.
Show exit ticket answersHide answers
- Crust, mantle, outer core (liquid), inner core.
- A divergent boundary. It makes a mid-ocean ridge (an underwater mountain range) where new crust forms.
- A transform boundary. The main hazard is earthquakes.
Common misconceptions
- The mantle is liquid lava. The mantle is almost all solid rock that flows extremely slowly; magma forms only in small pockets.
- The inner core is liquid because it is the hottest part. It is solid because of the enormous pressure at Earth's center.
- Plates float on the outer core. Plates are part of the lithosphere and move over the slowly flowing upper mantle, far above the core.
- Plates move quickly or only during earthquakes. Plates move steadily, a few centimeters a year. Earthquakes happen when stress built up over years is suddenly released.
- Continents and plates are the same thing. Most plates include both continental and oceanic crust, and a plate boundary is often far from a coastline.
Extension
- Next lesson: earthquakes and volcanoes in more depth, including how scientists measure earthquakes and how communities prepare for them.
- Make a flip book showing the continents moving apart over 200 million years, using the continental fit and fossil evidence.
Keep the learning going
Free resources from other Success Tutoring sites that match this topic.
More lesson plans
Living and Non-living Things: a School Grounds Hunt and Picture Card Sort
Students explore the school grounds to find living and non-living things, then sort picture cards and explain their thinking: living things grow, need food and water, and can make new living things like themselves. They finish by naming what plants and animals need to stay alive. Includes outdoor safety steps.
My Five Senses: Seeing, Hearing, Smelling, Tasting and Touching
Students name the five senses and the body parts we use for each, then explore safely at four stations: looking, listening, smelling and touching. They sort pictures by the sense they would use and learn that we often use more than one sense at a time. Tasting is talked about, not done, and clear rules keep everyone safe.
1st Grade Science: What Plants and Animals Need to Live, with a Bean Sprouting Investigation
Students learn the basic needs of animals (air, water, food and shelter) and plants (air, water, light and nutrients), sort picture cards, then set up a safe bean sprouting investigation comparing a seed with water and a seed without water, and record observations in a picture journal over the following week.
Need a timer for this lesson? Open the Classroom Timer or make random groups.