Grade 7 Math lesson plan · More Math resources · Special days calendar
Pi Day: Measuring Circles to Discover π
For Pi Day on March 14, students measure the circumference and diameter of real circular objects, calculate the ratio C ÷ d and discover that it is always close to π ≈ 3.14159. They discuss measurement error, use C = πd and A = πr² to solve problems, and compare Archimedes' bounds of 31071 and 317 with π.
- 60 minutes
- Grade 7
- Math
- Circles and π
- 🇺🇸 United States
By the Success Tutoring Teachers team · Updated · Educator review in progress · How we make our resources
Overview
Learning objectives
Students will…
- Measure the circumference and diameter of circular objects and calculate C ÷ d, recognizing that it is always close to π.
- Explain why measured values of C ÷ d vary, and how to reduce measurement error.
- Use C = πd (or C = 2πr) and A = πr² to solve problems, and compare historical approximations of π.
Success criteria
Students can say…
- I can measure a circumference and a diameter accurately and calculate C ÷ d.
- I can explain why my ratio is not exactly π.
- I can find the circumference and area of a circle from its radius or diameter.
- I can explain what Archimedes showed about π.
Curriculum focus: Geometry · State standards (Texas TEKS first)
Specific curriculum codes are added once our team has checked them against the official documents. How we align resources
Pi Day (March 14, or 3/14) began at San Francisco's Exploratorium in 1988, and in 2009 the U.S. House of Representatives passed a resolution supporting National Pi Day. UNESCO's International Day of Mathematics is also on March 14.
Key vocabulary
- circumference
- The distance around a circle.
- diameter
- A straight line from one side of a circle to the other, through the center. Its length is twice the radius.
- radius
- The distance from the center of a circle to its edge. Its length is half the diameter.
- π (pi)
- The ratio of any circle's circumference to its diameter. π ≈ 3.14159; its decimal digits go on forever without repeating.
- ratio
- A comparison of two quantities by division.
- irrational number
- A number that cannot be written exactly as a fraction of two whole numbers. Its decimal never ends or repeats.
- measurement error
- The difference between a measured value and the true value, caused by limits of the tools and the person measuring.
In the glossary: circumference, diameter, formula, irrational number, pi, radius, ratio
Materials & preparation
You will need
- Circular objects of different sizes: coins, cans, tape rolls, cups, plates, bin lids, bicycle wheels (at least five per group)
- String or thin ribbon, flexible measuring tapes, and rulers marked in millimeters
- Calculators
- Recording table (printable): Object; Diameter d (cm); Circumference C (cm); C ÷ d (to 2 decimal places); Difference from π
- Practice sheet and exit ticket (printable)
Before the lesson
- Collect enough circular objects for each group to measure five, including at least one small (under 3 cm) and one large (over 25 cm) object.
- Test the string method yourself so you can model it: wrap string once around, mark where it meets, then straighten and measure.
- Print the recording table and practice sheet.
Lesson sequence
- 1
Hook: why March 14?
5 minTeacher
- Write 3/14 on the board. Ask: 'In the United States, dates are written month first. Which date is 3/14? Why might it be celebrated in math classrooms around the world?'
- Say: 'It is Pi Day, because π starts 3.14. Pi Day was first celebrated at a science museum in San Francisco in 1988. March 14 is now also UNESCO's International Day of Mathematics. Today we discover where π comes from by measuring.'
Students
- Suggest why the date is linked to π.
- 2
Investigation: measure circles
18 minTeacher
- Model the method: measure the diameter across the widest part, through the center, in centimeters to the nearest millimeter. Wrap string once around the object, mark the meeting point, straighten it and measure the circumference.
- Groups measure five objects and record d and C, then calculate C ÷ d to 2 decimal places.
- Circulate. Ask: 'How do you know you measured through the center? Did the string slip or overlap? Which object is hardest to measure accurately?'
Students
- Measure the diameter and circumference of five objects and record them.
- Calculate C ÷ d for each object.
- 3
Discuss results and error
10 minTeacher
- Collect ratios on the board. Ask: 'What do you notice?' Draw out: every ratio is a little more than 3, usually between about 3.1 and 3.2, whatever the size of the circle.
- Say: 'For every circle, the circumference divided by the diameter is the same number. We call it π (pi). π ≈ 3.14159, and its digits go on forever without repeating.'
- Discuss error using sample data: a coin with d = 2.5 cm and C = 7.9 cm gives 3.16; a bin lid with d = 30.0 cm and C = 94.0 cm gives about 3.13. Ask: 'If you are 1 mm out on the coin's circumference, how much does the ratio change?' (About 0.04.) 'And on the bin lid?' (About 0.003.) Conclude: errors matter more for small objects, so larger objects and careful measuring give better estimates.
- Ask: 'How could we improve our estimate?' (Measure larger objects, wrap the string several times and divide, average many results.)
Students
- Compare ratios and explain why they are not all exactly π.
- 4
Formulas and Archimedes
12 minTeacher
- Derive the circumference formula: 'If C ÷ d = π, then C = πd. Because d = 2r, C = 2πr.'
- Worked example: a circle with diameter 12 cm has C = π × 12 ≈ 37.70 cm.
- Introduce area: A = πr². Worked example: a circle with radius 5 cm has A = π × 5² = 25π ≈ 78.54 cm². Stress that area is in square units.
- Archimedes: 'More than 2,000 years ago, the Greek mathematician Archimedes drew polygons with 96 sides inside and outside a circle. He showed that π is between 31071 and 317.' Students convert: 31071 ≈ 3.1408 and 317 = 227 ≈ 3.1429. Ask: 'Is π inside this range?' (Yes: 3.1408 < 3.14159 < 3.1429.)
- Say: '227 is a useful approximation, but it is not exactly π; it is a little too big.'
Students
- Follow the worked examples and check the Archimedes decimals on a calculator.
- 5
Practice and exit ticket
15 minTeacher
- Students work on the practice questions. Use the π key on the calculator unless a question says otherwise, and round to 2 decimal places.
- In the last 5 minutes, students complete the exit ticket on their own. Sort into secure / nearly / not yet.
Students
- Complete practice questions independently.
- Answer the exit ticket on their own.
Worked examples
Circumference from the diameter
Find the circumference of a circle with diameter 12 cm, to 2 decimal places.
- Use C = πd.
- C = π × 12.
- C ≈ 37.699…, which rounds to 37.70 cm.
C ≈ 37.70 cm.
Area from the radius
Find the area of a circle with radius 5 cm, to 2 decimal places.
- Use A = πr².
- A = π × 5² = π × 25 = 25π.
- 25π ≈ 78.539…, which rounds to 78.54 cm². (Using π ≈ 3.14 gives 78.5 cm².)
A ≈ 78.54 cm².
Checking a measured ratio
A group measures a can: d = 6.6 cm and C = 20.8 cm. Calculate C ÷ d and compare it with π.
- C ÷ d = 20.8 ÷ 6.6 ≈ 3.1515…
- Round to 2 decimal places: 3.15.
- Compare: 3.15 − 3.14159… ≈ 0.01, so the result is very close to π. The small difference comes from measurement error.
C ÷ d ≈ 3.15, about 0.01 more than π, which is a good estimate.
Practice & answers
Printable student sheet
Pi Day Practice
Use the π key on your calculator unless told otherwise. Round answers to 2 decimal places and include units.
- 1Find the circumference of a circle with diameter 10 cm.
- 2Find the circumference of a circle with radius 7 cm.
- 3Find the area of a circle with radius 7 cm.
- 4Find the area of a circle with diameter 8 cm.
- 5A plate has diameter 26.0 cm and measured circumference 81.5 cm. Calculate C ÷ d and say whether it is more or less than π.
- 6A coin's diameter is 2.5 cm and its measured circumference is 7.9 cm, giving C ÷ d = 3.16. Explain why small objects often give less accurate ratios.
- 7A circle has circumference 50 cm. Find its diameter.
- 8Find the perimeter of a semicircle with diameter 10 cm (include the straight edge).
- 9A bicycle wheel has diameter 70 cm. How far does the bicycle travel, in meters, when the wheel turns 1000 times?
- 10Archimedes showed that π is between 31071 and 317. Write both as decimals to 4 decimal places.
- 11Which is closer to π: 3.14 or 227? Show your working.
- 12A pizza with diameter 30 cm costs the same as two pizzas with diameter 20 cm. Which gives more pizza? Show your working.
Show answersHide answers
- C = π × 10 ≈ 31.42 cm.
- C = 2 × π × 7 = 14π ≈ 43.98 cm.
- A = π × 7² = 49π ≈ 153.94 cm².
- r = 4 cm, so A = π × 4² = 16π ≈ 50.27 cm².
- 81.5 ÷ 26.0 ≈ 3.13, which is a little less than π (3.14159…).
- A small error, such as 1 mm, is a larger fraction of a small measurement, so it changes the ratio more (here about 0.04). Larger objects give more accurate ratios.
- d = C ÷ π = 50 ÷ π ≈ 15.92 cm.
- Curved part = π × 10 ÷ 2 ≈ 15.71 cm; plus 10 cm straight edge; perimeter ≈ 25.71 cm.
- One turn = π × 70 ≈ 219.91 cm. 1000 turns ≈ 219 911 cm ≈ 2199.11 m (about 2.2 km).
- 31071 ≈ 3.1408 and 317 ≈ 3.1429.
- π − 3.14 ≈ 0.0016; 227 − π ≈ 0.0013. So 227 is slightly closer (it is a little too big; 3.14 is a little too small).
- One 30 cm pizza: A = π × 15² ≈ 706.86 cm². Two 20 cm pizzas: 2 × π × 10² ≈ 628.32 cm². The one 30 cm pizza gives more.
Differentiation
Offer tasks by choice or quietly by invitation — avoid labelling groups by ability in front of the class.
Additional support
- Provide a recording table with the C ÷ d column set up and a worked first row.
- Give a formula card: C = πd, C = 2πr, A = πr², d = 2r, with a labeled circle diagram.
- Start with diameter-only questions before radius questions, and allow π ≈ 3.14 for first attempts.
Core task
- Complete the investigation with five objects and practice questions 1 to 12.
Extension challenge
- Improve your estimate: wrap string around a large object five times, measure, divide by 5, then calculate C ÷ d. Is it closer to π?
- Explain why A = πr² makes sense by cutting a circle into many sectors and rearranging them into a shape close to a parallelogram with base about πr and height r.
- Research another historical approximation of π (for example, from ancient Egypt, China or India) and compare its accuracy with Archimedes' bounds.
Assessment & exit ticket
Formative assessment
- Check recording tables for sensible measurements and correctly calculated ratios.
- Listen during the discussion for explanations of measurement error that mention the size of the object or the method.
- Check practice questions 3 and 4 for correct use of radius, not diameter, in A = πr².
- Sort exit tickets into secure / nearly / not yet.
Exit ticket
- What is π, in terms of a circle's circumference and diameter?
- Find the circumference and area of a circle with radius 3 cm, to 2 decimal places.
- A student measures a cup and gets C ÷ d = 3.21. Give one reason the result is not exactly π.
Show exit ticket answersHide answers
- π is the circumference divided by the diameter, for any circle: π = C ÷ d ≈ 3.14159.
- C = 2π × 3 = 6π ≈ 18.85 cm; A = π × 3² = 9π ≈ 28.27 cm².
- Any one: the string slipped or overlapped; the diameter was not measured through the center; the measurements were rounded; the cup's rim is thick or not perfectly circular.
Common misconceptions
- π equals [[22/7]] or 3.14 exactly. Both are approximations; π is irrational, and its decimal never ends or repeats.
- A bigger circle has a bigger π. C ÷ d is the same for every circle; bigger circles have bigger circumferences and diameters in the same ratio.
- Using the diameter in A = πr². The formula uses the radius; halve the diameter first.
- Area and circumference use the same units. Circumference is a length (cm); area is in square units (cm²).
- A measured ratio that is not 3.14 means you did it wrong. Small differences are expected because of measurement error; the aim is to get close and explain the difference.
Extension
- Hold a class 'best estimate of π' challenge, combining all groups' measurements and calculating the mean ratio.
- Investigate a circular object at school, such as a running track bend or a garden bed, and calculate its circumference and area.
Keep the learning going
Free resources from other Success Tutoring sites that match this topic.
More lesson plans
2D Shapes and 3D Objects: Sides, Corners, Faces, Edges and Vertices
Students name and describe flat 2D shapes by counting sides and corners, then explore solid 3D objects using everyday items such as a ball, a block, a box and a glue stick. They count faces, edges and vertices, test which objects roll, stack or slide, and play a feely-bag guessing game. Every count is checked and all practice is teacher-led show-and-say.
Comparing Length: Longer, Shorter, Taller and a First Go at Measuring with Blocks
Students compare the lengths and heights of everyday objects by lining up the ends, use the words longer, shorter and taller, and discover why a bent string or an uneven start can trick our eyes. They finish with a first go at measuring with cubes laid end to end, with no gaps and no overlaps.
Counting to 10 and Subitizing with Dot Cards and Ten Frames
Young learners practice counting to 10 with one number for each object, then learn to subitize: to see how many dots are on a card or ten frame at a glance, without counting. Flash cards, ten frames and whole-body counting games keep everyone moving, and every task works for students who cannot yet read.
Need a timer for this lesson? Open the Classroom Timer or make random groups.