Skip to content
Home: Success TutoringTeachers

STEM activities

Soft Landing: The Cup Drop Challenge

Teams design a landing system that stops a ping-pong ball bouncing out of a paper cup when dropped from shoulder height. Cheap, safe and mess-free, it teaches forces, impact absorption and iterative design.

By the Success Tutoring Teachers team · Updated · Educator review in progress · How we make our resources

Download PDF

Setup

  1. Mark a drop height of 1.5 m on a wall with tape. All drops happen from this height, standing on the floor.
  2. Lay out the shared materials and set a limit (for example: two sheets of paper, three cotton balls, one rubber band, one plastic bag, 30 cm of tape per team).
  3. Test a bare cup with the ball inside yourself so you can show students the ball bouncing out.

Safety

  • Students never stand on chairs, tables or ladders to drop designs. All drops are made standing on the floor.
  • Use child-safe scissors only, and keep the drop zone clear of other students.
  • Plastic bags must never go over anyone's head; cut them open before use and supervise younger students.
  • Check that no student has a latex allergy before using rubber bands; offer string instead.

How to run the activity

  1. 1Demonstrate: drop the bare cup with the ball inside from the 1.5 m line. The ball usually bounces out. Ask: 'Why did the ball leave the cup?'
  2. 2Explain the challenge: 'Design something that keeps the ball inside the cup after it lands. The ball must be able to fall into the cup freely; you cannot tape it in or cover the top.'
  3. 3Teams spend 5 minutes sketching two ideas and choosing one. Prompt: 'Will you slow the fall, or soften the landing, or both?'
  4. 4Teams build for 12 minutes using only the allowed materials.
  5. 5Run test drops: a team member stands on the floor and releases the cup from the 1.5 m line. Record whether the ball stayed in. Each team gets three drops; record the number of successes out of 3.
  6. 6Teams have 8 minutes to improve their design, then do three more drops.
  7. 7Discuss: 'Which ideas worked? Parachutes slow the fall; soft padding spreads the stopping over a longer time so there is less bounce.'

Learning outcomes

  • Describe how gravity pulls objects down and how air resistance can slow a fall.
  • Explain that soft materials reduce bounce by absorbing the impact.
  • Plan, build, test and improve a design against a clear success criterion.
  • Repeat trials to make results more reliable.

Printable student sheet

Soft Landing recording sheet

Design a landing system that keeps the ping-pong ball inside the cup. Record your plan and results.

  1. 1Draw and label your design. Which materials will you use?
  2. 2Will your design slow the fall, soften the landing, or both? Explain.
  3. 3Round 1 results: how many drops out of 3 kept the ball in?
  4. 4What will you change, and why?
  5. 5Round 2 results: how many drops out of 3 kept the ball in?
  6. 6Why did we test each design three times instead of once?
Show answers and teacher guidance
  1. Teacher guidance: a labelled drawing that names materials, e.g. 'plastic-bag parachute tied with string, cotton balls inside cup'.
  2. Model answer: 'Both. The parachute catches air to slow the cup, and the cotton balls absorb the bump so the ball does not bounce.'
  3. Record actual results (0–3).
  4. Teacher guidance: one change linked to a problem seen in testing.
  5. Record actual results (0–3).
  6. One drop could be lucky or unlucky; repeating trials makes the results more reliable.

Variations

  • Younger students: focus on padding only (no parachutes) and compare three materials: paper, cotton balls, plastic bag.
  • Higher drop: the teacher drops all designs from a fixed 2 m mark while standing on the floor with an outstretched arm.
  • Target landing: add a hoop on the floor; designs score extra if they land inside it.

Extension

  • Time each drop with a stopwatch and compare fall time with success rate.
  • Write a short design report: problem, idea, results, improvement.

Additional support

  • Provide a picture card of two starter ideas: a plastic-bag parachute and a cotton-ball cushion inside the cup.

Extension challenge

  • Teams must keep their design under a set mass or use the fewest materials, and justify their trade-offs.

Teacher notes

  • A ping-pong ball replaces the traditional raw egg: no food allergens, no mess, and the bounce makes success easy to judge.
  • Successful designs often line the bottom of the cup with crumpled tissue or add a parachute; both reduce the bounce.

More stem activities