Skip to content
Home: Success TutoringTeachers

STEM activities

Spaghetti and Marshmallow Tower Challenge

Teams have 18 minutes to build the tallest free-standing tower they can from dry spaghetti, tape and string, with a marshmallow (or a ball of modeling clay) on the very top. A classic test of planning, prototyping and teamwork, with food-safety guidance and reflection questions.

By the Success Tutoring Teachers team · Updated · Educator review in progress · How we make our resources

Download PDF

Setup

  1. Check your class allergy and dietary records before choosing the topper (see safety notes). If in doubt, use modeling clay balls for every team.
  2. Pack one kit per team in a paper bag so every team starts with exactly the same materials.
  3. Make teams of three or four.
  4. Write the rules on the board: 1. Tallest free-standing tower wins. 2. The topper must be on the very top. 3. The tower cannot be taped to the table, ceiling or chairs. 4. Use as much or as little of the kit as you like. 5. Hands off when time is up.

Safety

  • Allergies and dietary needs: marshmallows usually contain an animal-based gelling ingredient (most often from pork or beef), which some students avoid for religious, cultural or vegetarian reasons, and some contain allergens. Check records and families' wishes. Balls of modeling clay make a good alternative; most play dough (including homemade) contains wheat flour, so do not use it if any student must avoid wheat or gluten. Using the same topper for every team keeps the test fair.
  • Dry spaghetti contains wheat and some brands contain egg. For students with a wheat allergy, use paper straws or uncooked gluten-free spaghetti instead, again for the whole class if possible.
  • No eating any materials, including the marshmallow. Materials are handled by many hands and are not food once the challenge starts. Offer a separate, checked snack afterwards if you want a treat.
  • Snapped spaghetti has sharp ends. Keep faces away from the tower when it might collapse and sweep up pieces at the end.
  • Scissors are for tape and string only.

How to run the activity

  1. 1Hand out kits and read the rules aloud. Say: 'Height is measured from the table to the top of the topper. If you are holding the tower when time is up, it doesn't count.'
  2. 2Ask: 'What do you think will be the hardest part?' Take two or three predictions, but do not give tips; the discovery is part of the learning.
  3. 3Start the 18-minute timer. Call out the time at 10, 5, 2 and 1 minute remaining.
  4. 4Circulate and observe without helping. Note which teams plan for a long time before testing and which teams test early and often.
  5. 5When time is up, say 'Hands off!' Everyone steps back. Measure each standing tower and record the heights on the board.
  6. 6Discuss: 'Which teams put the topper on early? What happened when the topper went on at the very end?' Draw out that the weight of the topper often makes late towers lean or collapse.
  7. 7Teams complete the reflection questions on the recording sheet. If time allows, run a second 10-minute build so teams can apply what they learned.
  8. 8Collect the topper and any snapped spaghetti for disposal.

Learning outcomes

  • Apply the design process: plan, build, test, improve.
  • Explain how shapes such as triangles and a wide base make a structure stable.
  • Recognize the value of testing early and learning from failure.
  • Collaborate under time pressure, sharing ideas and roles.

Printable student sheet

Tower Challenge recording and reflection sheet

Plan, build and test your tower. Then answer the reflection questions as a team.

  1. 1Sketch your plan. Label where you will use triangles and how you will make the base stable.
  2. 2Prediction: how tall will your tower be? Why?
  3. 3Final height of your tower (from the table to the top of the topper).
  4. 4When did you first put the topper on? What happened?
  5. 5Which shape made your tower strongest? Why do you think so?
  6. 6Name one thing your team did well together and one thing you would change.
  7. 7If you built it again, what would you do differently in the first five minutes?
Show answers and teacher guidance
  1. Teacher guidance: look for a wide base, triangles (braces) and a plan for where the topper sits.
  2. Any reasoned estimate in centimeters.
  3. Record the actual measurement. A fallen tower is recorded as 0 cm and is still useful data.
  4. Guidance: teams that tested with the topper early usually found problems in time to fix them.
  5. Triangles. A triangle cannot change shape without one of its sides bending or breaking, so it resists being pushed out of shape better than a square.
  6. Any honest reflection, e.g. 'We listened to everyone's idea' / 'We should have tested sooner.'
  7. Guidance: strong answers mention building a small test tower quickly and adding the topper early.

Variations

  • Budget build: give each material a cost; teams buy what they need and the winner has the best height for the lowest cost.
  • Load test: add a second topper or a small paper cup with coins to test strength as well as height.
  • Silent build: teams may not talk and must communicate through sketches only. Debrief what that did to teamwork.
  • Shorter session: cut the build to 12 minutes and skip the second round.

Extension

  • Research how real towers and cranes use triangles and wide bases, and sketch a design that uses the same ideas.
  • Graph all teams' heights and compare the first and second builds.

Additional support

  • Show photos of a triangle and a square made from spaghetti, and let students push on each to feel which is stronger.
  • Assign roles (builder, tape cutter, measurer, time keeper) so every student has a clear job.

Extension challenge

  • Teams must calculate the height-to-material ratio or design the tower to survive a gentle fan or desk shake.

Teacher notes

  • Many teams spend most of the time planning and add the topper at the last minute, only to watch the tower fall. Teams that build quick prototypes with the topper on early tend to do better. This is the key lesson to debrief.
  • A tower of around 50 to 60 cm is a strong result for most classes; anything standing at all is worth celebrating.
  • Photograph each tower before measuring for a display of design ideas.

Free resources from other Success Tutoring sites that match this topic.

More stem activities